• 

  2015 Hua Fei CNC company dinner

• How to choose a suitable welding positioner?

• How to maintain the welding positioner?

• Rescue measures for CNC cutting machine with large cutting error

• How to protect a welding positioner?

• How to purchase a good welding positioner?

• Maintenance method of special welding chuck for positioner

• How much do you know about the classification of the welding rotators?

• Structure Types of Welding positioners

• The 8 principles for choosing a welding positioner

• Common fault problems and solutions of welding positioner

When working on a welding manipulator, care must be taken to reduce corrosion. Reduced corrosion can extend equipment life. The phenomenon that the metal surface and the surrounding medium undergo chemical or elect chemical interaction and are damaged is called corrosion. This corrosive effect will not only affect the normal operation of the mechanical surface equipment but also corrodes the components inside the machine.

For example, rainwater, chemical substances in the air, etc. enter the interior of the machine through the external channels, gaps, etc. of the welding machine parts, corroding the interior of the machine parts, accelerating mechanical wear and increasing mechanical failure. Because this corrosive effect is sometimes invisible and intangible, it is easy to be ignored. In this respect, it is more harmful. In to use, the management and operation personnel must take effective measures to reduce the impact on chemical corrosion on the machine according to the local weather conditions and air pollution conditions at the time. The focus is to prevent rainwater and chemical components in the air from invading the machine to minimize the Working in the rain.

Tests have shown that the main drive gears and bearings on welding manipulators operate at a temperature of -5 ° C, and the wear is increased by 10-12 times compared with that at 3 ° C.

When the temperature is relatively high, it will accelerate the deterioration of the lubricant. If the oil temperature exceeds 55-60 ° C, every 5 ° C increase in oil temperature will double the oxidation rate of the oil. Therefore, when the welding manipulator is used, it is necessary to prevent overload operation at low temperatures, ensure normal operation at the low-speed pre-heating stage, and make the machinery and equipment reach the specified temperature before driving or working. Do not ignore its importance because no problems occurred Sex.

It is also necessary to prevent the welding operation machine equipment from operating on high temperatures. During the operation of the machine, the values on various thermometers should be checked frequently. If problems are found, the machine should be shut down immediately for inspection and faults should be removed in time. For those who can't find the cause for a while, they must not make the machine work with failure of treatment. In normal work, you must also pay attention to check the working condition of the cooling system.

Previous Article：How to choose the right welding manipulator?

Next Article：Maintenance method of special welding chuck for welding positioner