Pipe flange circular seam automatic welding machine

Advantages：The automatic seam welding machine is easy to operate and install and can replace a large number of skilled welders to obtain a high-quality and efficient welding process.

Scope of Application：It is used for the automatic welding of the circular seam at both ends of the slender pipe, the pipe-pipe butt joint, the pipe-flange butt joint, and the pipe-elbow butt joint seam operation.

Brief Intro：The equipment consists of a flange automatic ring seam welding main unit, a gas welding power source, a precision welding swinging device, an electric control system, and an automatic wire feeding mechanism.

Quote Online

Tel : +86 18866411029

Product introduction:

The equipment consists of a flange automatic ring seam welding main unit, a gas welding power source, a precision welding swinging device, an electric control system, and an automatic wire feeding mechanism. The Pipe flange circumferential seam automatic welding machine is mainly used for the automatic welding of flange ring seams at both ends of slender pipes. It can be effectively used for ring welding of pipe-pipe butt joints, pipe-flange butt joints, and pipe-bend butt joints.

This special seam welding machine is suitable for automatic welding of carbon steel ring seams. The thickness of the welding plate is ≥3mm. The appearance of the seam is beautiful. The width and remaining height of the seam are uniforms. The entire welding seam can be welded continuously and at once without stopping the welding process in the middle. This will greatly improve welding efficiency and obtain high-quality welds at the same time.

Pipe flange circular seam automatic welding machine

Product parameters:

Model	HFBD-05
Control method	Digital programming control
Speed	0-1500mm / min is set in increments of 1 ‰
Swing amplitude	± 40mm increment unit 0.1mm
Swing distance	Slider stroke 5-95mm increment unit 0.1mm
Skateboarding trip	100mm
Stop time	Left center right 0-2s increment unit 0.1s
Rated load	25kg
Moment	700Kg-cm
Power supply	220V,50Hz,2A
Cylinder diameter	300--1200mm
Barrel length	L≤2500mm （Add two heads）
Wall thickness	1-6mm