• 

  2015 Hua Fei CNC company dinner

• How to choose a suitable welding positioner?

• How to maintain the welding positioner?

• Rescue measures for CNC cutting machine with large cutting error

• How to protect a welding positioner?

• How to purchase a good welding positioner?

• Maintenance method of special welding chuck for positioner

• How much do you know about the classification of the welding rotators?

• Structure Types of Welding positioners

• The 8 principles for choosing a welding positioner

• Common fault problems and solutions of welding positioner

For the first time, users who buy CNC plasma cutting machines do not know too much about CNC plasma cutting machines. Still, these do not hinder their views on CNC plasma cutting machines. These customers will often use CNC flame cutting machines to cut out Compared with the workpiece. If the workpiece cut by the CNC plasma cutting machine has a certain slope, then I believe that the user will not be satisfied with this answer. So when we explain, we will say that the workpieces made by the domestic plasma power supply equipped with the CNC plasma cutting machine have a certain slope. If you want to cut better, you can use the imported plasma power supply. The imported plasma power supply is on the slope. The finish is better, but the price is several times higher than the domestic ones.

Although this is only an explanation, it is also a fact that the imported plasma power supply is slightly better than the domestic one in the same model:

1. In the case of the same model, such as the 100A plasma power supply, the imported plasma power supply can be slightly thicker than the domestic plasma power supply.

2. The domestic plasma power supply is used on the CNC plasma cutting machine. The slope of the processed workpiece is generally 5~8 degrees. The imported plasma power supply is generally 3 to 5 degrees.

3. The electrodes and nozzles on the plasma power torch are wearing parts. The effective working time of the wearing parts of the imported plasma power supply is several times that of the wearing parts of the domestic plasma power supply, but the price of the wearing parts of the imported plasma power supply is domestic. Several times.

4. In terms of the service life of the plasma power supply, the service life of the imported plasma power supply is longer than that of domestic production. Because the self-protection of the imported plasma power supply is very strong, the requirements for its normal operation are higher than domestic production. For example, the voltage, There are clear standards for air pressure, water pressure, and the degree of wear of wearing parts.

Previous Article：Several points that should be paid attention to when using a CNC plasma cutting machine outdoors

Next Article：Several points that should be paid attention to when using a CNC plasma cutting machine outdoors